WaterCop Flood Sensor with Single Sensor Paired with WaterCop Shuts Off Water Valve Replaces WH-100. Made in USA. WCDFS1 water alarm detects moisture with single probe moisture sensor . Power: two AA batteries or hard-wire a 120VAC adapter. Internal radio transmission antenna communicates with WaterCop if installed. Water sensor alarm intensity similar to watch alarm or pager beep when probe detects moisture. WaterCop , if installed, shuts off WaterCop protected water valve. Internal 418 MHz radio transmitter chip set has up to a 200 foot operating range. Moisture sensor has user adjustable digital security codes. Low battery warning chirp. 3 VDC. 10 mA. Compatible with older and new classic systems. 6 foot water sensor cord. Indoor use only. Note: Safe Home does not recommend using this unit as a local stand-alone alarm as it is not loud . It is meant to work with the Water Cop unit.
WaterCop Flood Sensor Single Probe
Related Post
WaterCop Classic 1.25 In. Lead Free Ball Valve with Actuator, 3 SensorsWaterCop Classic 1.25 In. Lead Free Ball Valve with Actuator, 3 Sensors
The WaterCop automatic shutoff valve installs on the main water line near the existing manual shut-off valve. WaterCop flood sensors install near water using appliances and in rooms where running water is present. Each WaterCop Classic system can support an unlimited number of water and low temperature sensors. When leaking water comes in contact with any of the sensors, a wireless signal is immediately broadcast to the WaterCop main valve causing the valve to close. Water flow is quickly cutoff to all areas of the home and any continuous flooding is stopped.
WaterCop Flood Sensor Dual ProbeWaterCop Flood Sensor Dual Probe
Monitor specific leak prone areas within the home for unwanted and potentially damaging water accumulation of internal flooding. Flood sensors feature a robust 418MHz radio transmitter chipset with up to a 200 foot operating range, user adjustable digital security codes, and operate on either two (2) AA batteries or an optional AC power adapter. Low battery warning chirp. Sensors are equipped with two (2) sensor probes with 6 foot sensor cords each. When leaking water comes in contact with either sensing probe the Water Sensor sends a radio signal to the WaterCop "on duty" telling it to shut off the main water supply. Each WaterCop can support an unlimited number of Water Sensors.
WaterCop Classic Motorized Actuator W/Water Valve, Lead Free,0.75 In.WaterCop Classic Motorized Actuator W/Water Valve, Lead Free,0.75 In.
Electric Valve Actuator with 3/4 Inch Lead Free Water Valve Shuts Off Water Fast Water Cop automatic water valve shut off device with 3/4 inch ball valve meets all USA state lead free water valve standards: shut off the main water valve instantly by pushing the red button. The green button instantly turns water on. Add to this WaterCop electric valve by placing Water Hound moisture sensors (purchase separately) near or under water using appliances like dishwashers, washing machines, etc. You'll hear the beeping sound of the sensor near the appliance and know you've got a problem because you'll have no water! Note: Low lead or no lead water valve standards apply everywhere as of January 2014. Fully automatic, runs on electricity. No need to purchase batteries. This Water Cop system includes a 3/4 inch brass ball valve that meets the low lead standards and the motorized actuator with a security system alarm interface. Turn water on by pushing the green button. The Water Cophas a built-in I/O port with RJ45 connection. No Water Hound moisture sensors are included. Watercop moisture sensors and low temperature sensors sold separately. Low voltage interface terminal direct wires to home security alarm system or home automation control panel. For security systems with auxiliary outputs, contact security system dealer/installer for interface installation. 5 VDC output available from the WaterCop. Information about the Low Lead Standards: Lead Free NSF61G refers to the wetted surface of pipe, fittings and fixtures in potable water systems that have a weighted average lead content = 0.25% Source: California Health & Safety Code (116875); Vermont Act 193. California Assembly Bill 1953 and Vermont Act 193 reduced the amount of lead in specific plumbing fixtures from its current amount of no more than 8% to a new standard not to exceed 0.25%. All fifty states must comply with this NEW 0.25% requirement by January 4, 2014.
