Water Valve Actuator for 1.25 Inch Water Lines Includes Lead Free Ball Valve WaterCop automatic water shut-off valve device by Dynaquip is an industrial quality, electrically automated full port brass ball valve that meets VT and CA standards for potable water systems. This Water Cop device features a "direct mount" actuator mounting for precision automation. Install this Water Cop actuator on the incoming main water supply line within a home or business. Push the red button to shut off water; push the green button to turn it on. Requires 115VAC current to operate. Or add a battery back-up in case of a power failure. What does lead free mean with regard to water valves? Lead Free NSF61G refers to the wetted surface of pipe, fittings and fixtures in potable water systems that have a weighted average lead content = 0.25% Source: California Health & Safety Code (116875); Vermont Act 193. California Assembly Bill 1953 and Vermont Act 193 reduced the amount of lead in specific plumbing fixtures from its current amount of no more than 8% to a new standard not to exceed 0.25%. All fifty states must comply with this NEW 0.25% requirement by January 4, 2014. The WaterCop automatic water valve device includes a security system alarm interface and a 1.25 Inch brass ball valve that meets low lead standards for drinking water. The WaterCop actuator's integrated 418MHz radio frequency receiver chip set has user adjustable digital security codes, which allows nearby Water Cop systems to operate independently. This unit features auxiliary low voltage contacts with modular RJ-45 interface socket for simplified connection to optional WaterCop accessories — or integrate with a third-party home security or home automation system using standard Cat-5 computer cabling. Low voltage interface terminal direct wires to home security alarm system or home automation control panel. For security systems with auxiliary outputs, contact security system dealer/installer for interface
WaterCop Classic Motorized Actuator W/Lead Free Water Valve, 1.25 In.
Related Post
WaterCop Wireless Water Leak Detection System, 1 In. Valve, 3 SensorsWaterCop Wireless Water Leak Detection System, 1 In. Valve, 3 Sensors
The WaterCop automatic shutoff valve installs on the main water line near the existing manual shut-off valve. WaterCop flood sensors install near water using appliances and in rooms where running water is present. Each WaterCop Classic system can support an unlimited number of water and low temperature sensors. When leaking water comes in contact with any of the sensors, a wireless signal is immediately broadcast to the WaterCop main valve causing the valve to close. Water flow is quickly cutoff to all areas of the home and any continuous flooding is stopped.
WaterCop Flood Sensor Dual ProbeWaterCop Flood Sensor Dual Probe
Monitor specific leak prone areas within the home for unwanted and potentially damaging water accumulation of internal flooding. Flood sensors feature a robust 418MHz radio transmitter chipset with up to a 200 foot operating range, user adjustable digital security codes, and operate on either two (2) AA batteries or an optional AC power adapter. Low battery warning chirp. Sensors are equipped with two (2) sensor probes with 6 foot sensor cords each. When leaking water comes in contact with either sensing probe the Water Sensor sends a radio signal to the WaterCop "on duty" telling it to shut off the main water supply. Each WaterCop can support an unlimited number of Water Sensors.
WaterCop Classic Motorized Actuator W/Water Valve, Lead Free,0.75 In.WaterCop Classic Motorized Actuator W/Water Valve, Lead Free,0.75 In.
Electric Valve Actuator with 3/4 Inch Lead Free Water Valve Shuts Off Water Fast Water Cop automatic water valve shut off device with 3/4 inch ball valve meets all USA state lead free water valve standards: shut off the main water valve instantly by pushing the red button. The green button instantly turns water on. Add to this WaterCop electric valve by placing Water Hound moisture sensors (purchase separately) near or under water using appliances like dishwashers, washing machines, etc. You'll hear the beeping sound of the sensor near the appliance and know you've got a problem because you'll have no water! Note: Low lead or no lead water valve standards apply everywhere as of January 2014. Fully automatic, runs on electricity. No need to purchase batteries. This Water Cop system includes a 3/4 inch brass ball valve that meets the low lead standards and the motorized actuator with a security system alarm interface. Turn water on by pushing the green button. The Water Cophas a built-in I/O port with RJ45 connection. No Water Hound moisture sensors are included. Watercop moisture sensors and low temperature sensors sold separately. Low voltage interface terminal direct wires to home security alarm system or home automation control panel. For security systems with auxiliary outputs, contact security system dealer/installer for interface installation. 5 VDC output available from the WaterCop. Information about the Low Lead Standards: Lead Free NSF61G refers to the wetted surface of pipe, fittings and fixtures in potable water systems that have a weighted average lead content = 0.25% Source: California Health & Safety Code (116875); Vermont Act 193. California Assembly Bill 1953 and Vermont Act 193 reduced the amount of lead in specific plumbing fixtures from its current amount of no more than 8% to a new standard not to exceed 0.25%. All fifty states must comply with this NEW 0.25% requirement by January 4, 2014.
