Product Features
- Measuring Range 6-45%
- Built in calibration
- Calibration for domestic species
- Measuring depth of 3/16″ and 7/16″
Are you worry about the cracks, splits, warping when purchasing or using the lumber and hardwoods?
Are you want to know the water leak around your home? Such as floors, walls and under carpets due to roof leaks, flooding, burst pipes, underground seepage or other water infiltration sources.
TAVOOL MOISTURE METER CAN TOTALLY MEET YOUR NEEDS! Tavool moisture meter tester is ideal to use in WOODWORKING, BUILDING CONSTRUCTION, AGRICULTURE RESTORATION and floor-laying. By using Tavool moisture detector for working, professionals can ensure that you have consistent results!!
Classify in 8 types of woods for selection: based on different types of wood materials
– A: Teak, Walnut, Afrormosia, Rubber Tree Imbuia, Kokrodua, Niove Bidinkala, Cork
– B: Keruing, White Poplar, Beech, Cedar, Tola
– C: Lauan, Ash, Elm, Fir, Maple, Padauk Oak
– D: Basswood, Larch, Pine, Birch
– E: Abura,Bitterwood, Cordia, Erimado, etc.
– F: Amboyna, Basswood, coachwood, etc
– G: Gequ, Nohor, Rubberwood, etc
– H: Cherry, Agba, Birch, Cedar, etc.
FEATURES:
1. Display:LCD and green backlight
2. Measurement Range:
Wood:the scale A woods: 6%-60%
Building Material:0.2-2.9%
Temperature:0 ~ 40℃ or 32 ~ 104℉
3. Accuracy:Wood:±2%
Temperature:±2℃ / ±4℉
5.Max/Min moisture measurement
6.HOLD function to freeze the measurement
7. Automatic Power-off in 10 minutes without operation, Automatic Backlight-Off in 5 seconds without operation
8. Memory function: If you have held the value and then turn off the instruction, you will see the same value when you turn on the device again.
Package Included:
1 x Tavool Moisture Meter; 1 x Operating Manual; 1 x Battery; 1 x screwdriver
The scanner s/D is a dual depth (¼” or ¾”) Painless, capacitance-type meter. The S/D uses the relationship between the Dielectric properties and the moisture content of the wood to produce a moisture reading that is the average value of the area between the surface and the maximum depth of penetration. Since painless Meters leave no mark, they’re preferred when testing finished products Such As cabinet doors, Table tops and ready to finish furniture. The S/D range of measurement range is from 5% – 99% dependent upon species. Temperature correction is not necessary. Comes with instructions, specie card and carry pouch. Requires 9V battery (battery included) & 2 Year .
The SAM-PRO Dual Moisture Meter quickly tests moisture levels & temperature in Wood, Concrete, Drywall & Other Building Materials. Easily detect Water Damage, Mold Risk, Leaks, Wet Building Materials & Seasoned Firewood. Simply take off the protective cap, press the Power button, select your material type and push the two pins of the meter into the material you want to measure. A couple seconds later the device will display the moisture content on its large easy-to-read LCD display. Taking measurements in hard to access area, like the back of your firewood shed? Turn on the backlight. Want to know the range of moisture values taken at various locations? Use the Min and Max display feature of the SAM-PRO moisture tester. Even includes an air temperature sensor. Packaging Includes: ✔︎ Moisture Meter ✔︎ Travel Case ✔︎ Owner’s Manual ✔︎ 9V Battery