This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases
– This sensor can not work alone, need connect to Z-wave gateway hubs (not work with VERA)
– First time connect to Z-wave gateway, please close to the gateway, better not more than 1.0 meter, then install the place you need
– When connect to gateway, quickly click z-wave trigger, keep about 0.5 seconds, then quickly release the trigger, if not connected, repeat click
Commodity: Water sensor
Installation Method: External sensor probe
Power: battery supported, 1.5V*2
Length of wire: 1.5m
Working current: ≤35mA ( when it is triggered )
Standby current: ≤5uA
Port: Micro USB
Working temperature: 0℃~ +50℃
Working humidity: ≤80%
Communication technology: Z-wave
Communication frequency: 908.42MHz
Transmission speed: 9.6 / 10 / 100 kbps
Transmission distance: Indoor 30m (the distance will be influenced by the surrounding environment)
This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases