Add Water Sensors XS-01 to FloodStop System to Increase Coverage Floodstop water sensors XS-01 add protection to your FloodStop system for a single appliance. Note: not compatible with new Whole House Floodstop Systems. Moisture sensors connect with primary water leak sensor to increase water damage protection for any Flood Stop Automatic Water Valve Shut-Off Devices with Water Alarm made from 2007 to present. Use Flood Stop Systems with Full-Port Motorized Ball Valves for washing machines, hot water heaters, dishwashers, ice makers, water dispensing refrigerators and more. Size of this flat water leak sensor is 1.25 inches by 7.5 inches. Sensor lead is 3 feet long. Water moisture sensors connect in a "train" to increase area of coverage for flood protection for water appliances with individual FloodStop water alarm protection. NOTES: Quantity pricing is available on this item.
Floodstop Individual Water Appliance Additional Water Sensor XS-01
Related Post
FLOODSTOP for Water Heater FS3/4NPTFLOODSTOP for Water Heater FS3/4NPT
FLOODSTOP PROTECTS YOUR HOME 24 HOURS A DAY, EVERYDAY. Normally open relay output can be connected to an alarm system, automatic phone dialer or both! Open and close the valve with the press of a button. EASY INSTALLATION: Connect Floodstop Valve upstream on the cold water inlet. Mount the control panel to the wall. Place the water sensor under the heater. Plug in the valve assembly and power supply. KIT INCLUDES: 3/4" Motorized Mall Valve FLOODSTOP Control Unit Water Sensor Wall Adapter and Mounting Hardware
FloodStop System for Water Heater/Softener, FS1.25 NPTFloodStop System for Water Heater/Softener, FS1.25 NPT
Reduce Water Heater Damage with Flood Stop FS 1.25-NPT Water Alarm /Valve For 1.25 inch diameter pipe. One Floodstop moisture sensor. Add multiple sensors beneath or near protected pipe if desired. 87 dB water alarm sounds as automatic water shut off valve closes when sensor is activated by moisture or water. Water damage reduced: water supply is shut off. Easy to install on water heaters, water softeners or any appliance with a 1.25 inch pipe. Output Contacts for Security Systems, Home Automation or Auto-dialer System. Installs in about 15 minutes. Solid brass, low lead full port motorized ball valve meets January 1, 2014 drinking water requirements for lead free water valves. Moisture Sensor Activates 87 dB water alarm as automatic water shut off valve closes. Water sensitivity control with 4-pin connection to valve/sensor connector. AC adapter/transformer or batteries (4 AA batteries, not included). Batteries serve as battery backup when AC is interrupted. Partial vacuum occurs inthe tank when water is turned off reducing the water leak amount. Alarm beeps: has mute button. Water Sensor: 1.5" X 7.5", double sided. Additional sensors may be added in series. AC Adapter Cord Length: 6 Ft. Wire Length from the Controller to the Valve: About 30 Inches Long. FloodStop Controller: 3 buttons: Mute, Close Valve and Open Valve. One year limited manufacturer warranty. Automatic Water Valve Shut Off Technical Specifications: UL Listed Class 2 Wall Adapter, 115AC/9VDC. UPC listed, full port, motorized ball valve: CNC machined. Motor operates at 6VDC.Rated 0-180 PSI. Max 250 PSI. Solid brass. Signal outputs: 2 normally closed. Alarm: beeping with mute button. To install, connect valve to the cold water line to the water heater. Mount the control unit. Place sensor(s) on floor. Plug power supply into an un-switched outlet. Note: electricity is used only when the sensor detects water. NOTE: DO NOT PLACE SENSOR DIRECTLY ON METAL PAN OR DAMP FLOOR. Insulate against floor
FloodStop FS-3/4-C Automatic Valve for Water HeaterFloodStop FS-3/4-C Automatic Valve for Water Heater
FS 3/4C Floodstop With Battery Back-Up Option for Power Outage 3/4 Inch compression fitting water valve and water alarm system meets 2014 drinking water standards of USA. Battery back-up option. in case of power outage. Full port water valve unit for all 3/4 inch copper pipe applications. Floodstop responds immediately to signals from attached water sensor or extra sensors. 87 decibel alarm sounds continuously after valve closes in response to a wet water sensor. By On-Site Pro. Flood Stop Water Heater or Water Softener FS 3/4 C Features: Optional Additional Sensors : Increase coverage. Sensors "train" together. Valve Length: 3.5 inches. Reset and Test Buttons : Test valve performance without water. Controller: 20VAC and/or battery backup (4 AA batteries).. Simplicity: Easily installed, operated and maintained. Multiple Applications: Residential, condo and apartment dwellings. Operation: Full port brass ball valve automatically shuts off water supply to water heater when watersensor/sensors get wet. Single Water Appliance Application: No wires to route throughout the home Loud 87 decibel Alarm: Beeps. Mute button. One Water Sensor Included: 1.5" X 7.5", double sided. Add optional sensors in series. AC Adapter Cord: 6 ft. long Wire Length from the Controller to the Valve: About 30 Inches Long. Warranty: 1 year limited manufacturer warranty FloodStop Controller: 3 buttons: Mute, Close Valve and Open Valve. Water sensitivity adjustment. Clockwise: less sensitive. Counter clockwise: More sensitive. 4-pin connection to valve/sensor connector. Outputs: Normally closed. Contacts for any device that can utilize them, like auto phone dialer, alarm systems, X10 home automation devices. DIY or hire a plumber. Installation: 15 minutes or less in most instances. The Floodstop for water heaters includes a security system and auto dialer output contacts. The water shut off controller is AC with a battery back up.(No batteries included). With a full port motorized
