LeakAlarms.com FloodStop FloodStop System for Water Heater/Softener, FS1.25 NPT

FloodStop System for Water Heater/Softener, FS1.25 NPT

Amazon Price: $158.90 $158.90 You save: (%) (as of February 24, 2018 5:25 am – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

Reduce Water Heater Damage with Flood Stop FS 1.25-NPT Water Alarm /Valve For 1.25 inch diameter pipe. One Floodstop moisture sensor. Add multiple sensors beneath or near protected pipe if desired. 87 dB water alarm sounds as automatic water shut off valve closes when sensor is activated by moisture or water. Water damage reduced: water supply is shut off. Easy to install on water heaters, water softeners or any appliance with a 1.25 inch pipe. Output Contacts for Security Systems, Home Automation or Auto-dialer System. Installs in about 15 minutes. Solid brass, low lead full port motorized ball valve meets January 1, 2014 drinking water requirements for lead free water valves. Moisture Sensor Activates 87 dB water alarm as automatic water shut off valve closes. Water sensitivity control with 4-pin connection to valve/sensor connector. AC adapter/transformer or batteries (4 AA batteries, not included). Batteries serve as battery backup when AC is interrupted. Partial vacuum occurs inthe tank when water is turned off reducing the water leak amount. Alarm beeps: has mute button. Water Sensor: 1.5" X 7.5", double sided. Additional sensors may be added in series. AC Adapter Cord Length: 6 Ft. Wire Length from the Controller to the Valve: About 30 Inches Long. FloodStop Controller: 3 buttons: Mute, Close Valve and Open Valve. One year limited manufacturer warranty. Automatic Water Valve Shut Off Technical Specifications: UL Listed Class 2 Wall Adapter, 115AC/9VDC. UPC listed, full port, motorized ball valve: CNC machined. Motor operates at 6VDC.Rated 0-180 PSI. Max 250 PSI. Solid brass. Signal outputs: 2 normally closed. Alarm: beeping with mute button. To install, connect valve to the cold water line to the water heater. Mount the control unit. Place sensor(s) on floor. Plug power supply into an un-switched outlet. Note: electricity is used only when the sensor detects water. NOTE: DO NOT PLACE SENSOR DIRECTLY ON METAL PAN OR DAMP FLOOR. Insulate against floor

Related Post

FloodStop FS3/8CD Sink (Hot and Cold) FloodStop with 3/8 Inch Compression ValvesFloodStop FS3/8CD Sink (Hot and Cold) FloodStop with 3/8 Inch Compression Valves

Rating: 
Amazon Price: $214.03 (as of May 4, 2024 1:23 am – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

Water Alarm with Water Valve Stops Sink Leaks Automatically to Reduce Damage Overstock Special. Save Money! Install a Floodstop FS3/8CD water alarm with automatic water valve shut-off that closes both hot and cold water supplly lines when water leaks under a sink. Sounds an 87 db alarm. Flood Stop unit has two full port motorized water valves, lead free, with 3/8 inch compression fittings to fit hot water and cold water lines. This advanced water leak detection system helps prevent water damage and is easily installed. These brass water valves meet California, Vermont and all USA state lead free water valve standards for drinking water. Flood Stop Sink/Wash Basin Installation is Simple: Connect the water valve to cold and hot water lines under the sink. Mount the control unit. Place sensor(s) on floor. Plug power supply into an un-switched outlet. Note: electricity is used only when the sensor detects water. NOTE: DO NOT PLACE SENSOR DIRECTLY ON METAL PAN OR DAMP FLOOR. If no water ispresent and alarm sounds, place paper towel or cloth under sensor to "insulate" against floor dampness or metal of pan. When the paper or cloth gets wet, the sensor activates the shut-off and sounds the alarm. How FloodStop (FS 3/8-CD) Works: FloodStop valves connect to the angle stops and supply lines. Water leak sensor is placed at the base of the fixture (sink, laundry tubs, bathtub, etc.). Valve remains open until a water leak or water loss is detected. Water on the sensor signals the Floodstop controller which closes the valve and alarms. Valve remains closed until system is reset, and sensor is dry. FloodStop (FS 3/8-CD) Components: Motorized Ball Valves (Two Valves, 3/8 inch Compression Fitting). Control unit with battery backup (4 C batteries, not included). AC power adapter (or use 4 C Batteries as primary power source). Water leak sensor (1.25" X 7.5"). Output contact wires (2). Technical Specifications: UL Listed Class 2 Wall Adaptor, 115AC/9VDC. UPC listed,

Product Details

  • Is Discontinued By Manufacturer ‏ : ‎ No
  • Product Dimensions ‏ : ‎ 11.75 x 7.75 x 2 inches; 2.98 Pounds
  • Item model number ‏ : ‎ FS38CD
  • Date First Available ‏ : ‎ September 14, 2004
  • Manufacturer ‏ : ‎ IPS Corporation
  • ASIN ‏ : ‎ B0019Y4UWU
    • Best Sellers Rank: #309,305 in Tools & Home Improvement
    • #202 in Water Detectors & Alarms

Floodstop Individual Water Appliance Additional Water Sensor XS-01Floodstop Individual Water Appliance Additional Water Sensor XS-01

Amazon Price: $30.15 (as of May 3, 2024 5:35 am – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

Add Water Sensors XS-01 to FloodStop System to Increase Coverage Floodstop water sensors XS-01 add protection to your FloodStop system for a single appliance. Note: not compatible with new Whole House Floodstop Systems. Moisture sensors connect with primary water leak sensor to increase water damage protection for any Flood Stop Automatic Water Valve Shut-Off Devices with Water Alarm made from 2007 to present. Use Flood Stop Systems with Full-Port Motorized Ball Valves for washing machines, hot water heaters, dishwashers, ice makers, water dispensing refrigerators and more. Size of this flat water leak sensor is 1.25 inches by 7.5 inches. Sensor lead is 3 feet long. Water moisture sensors connect in a "train" to increase area of coverage for flood protection for water appliances with individual FloodStop water alarm protection. NOTES: Quantity pricing is available on this item.

FLOODSTOP for Water Heater FS3/4NPTFLOODSTOP for Water Heater FS3/4NPT

Amazon Price: $146.95 (as of April 19, 2020 8:45 am – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

FLOODSTOP PROTECTS YOUR HOME 24 HOURS A DAY, EVERYDAY. Normally open relay output can be connected to an alarm system, automatic phone dialer or both! Open and close the valve with the press of a button. EASY INSTALLATION: Connect Floodstop Valve upstream on the cold water inlet. Mount the control panel to the wall. Place the water sensor under the heater. Plug in the valve assembly and power supply. KIT INCLUDES: 3/4" Motorized Mall Valve FLOODSTOP Control Unit Water Sensor Wall Adapter and Mounting Hardware

GYROOR X8 Scooter