Add Water Sensors XS-01 to FloodStop System to Increase Coverage Floodstop water sensors XS-01 add protection to your FloodStop system for a single appliance. Note: not compatible with new Whole House Floodstop Systems. Moisture sensors connect with primary water leak sensor to increase water damage protection for any Flood Stop Automatic Water Valve Shut-Off Devices with Water Alarm made from 2007 to present. Use Flood Stop Systems with Full-Port Motorized Ball Valves for washing machines, hot water heaters, dishwashers, ice makers, water dispensing refrigerators and more. Size of this flat water leak sensor is 1.25 inches by 7.5 inches. Sensor lead is 3 feet long. Water moisture sensors connect in a "train" to increase area of coverage for flood protection for water appliances with individual FloodStop water alarm protection. NOTES: Quantity pricing is available on this item.
Floodstop Individual Water Appliance Additional Water Sensor XS-01
Related Post
FloodStop FS-3/4-C Automatic Valve for Water HeaterFloodStop FS-3/4-C Automatic Valve for Water Heater
FS 3/4C Floodstop With Battery Back-Up Option for Power Outage 3/4 Inch compression fitting water valve and water alarm system meets 2014 drinking water standards of USA. Battery back-up option. in case of power outage. Full port water valve unit for all 3/4 inch copper pipe applications. Floodstop responds immediately to signals from attached water sensor or extra sensors. 87 decibel alarm sounds continuously after valve closes in response to a wet water sensor. By On-Site Pro. Flood Stop Water Heater or Water Softener FS 3/4 C Features: Optional Additional Sensors : Increase coverage. Sensors "train" together. Valve Length: 3.5 inches. Reset and Test Buttons : Test valve performance without water. Controller: 20VAC and/or battery backup (4 AA batteries).. Simplicity: Easily installed, operated and maintained. Multiple Applications: Residential, condo and apartment dwellings. Operation: Full port brass ball valve automatically shuts off water supply to water heater when watersensor/sensors get wet. Single Water Appliance Application: No wires to route throughout the home Loud 87 decibel Alarm: Beeps. Mute button. One Water Sensor Included: 1.5" X 7.5", double sided. Add optional sensors in series. AC Adapter Cord: 6 ft. long Wire Length from the Controller to the Valve: About 30 Inches Long. Warranty: 1 year limited manufacturer warranty FloodStop Controller: 3 buttons: Mute, Close Valve and Open Valve. Water sensitivity adjustment. Clockwise: less sensitive. Counter clockwise: More sensitive. 4-pin connection to valve/sensor connector. Outputs: Normally closed. Contacts for any device that can utilize them, like auto phone dialer, alarm systems, X10 home automation devices. DIY or hire a plumber. Installation: 15 minutes or less in most instances. The Floodstop for water heaters includes a security system and auto dialer output contacts. The water shut off controller is AC with a battery back up.(No batteries included). With a full port motorized
FloodStop FS3/8CD Sink (Hot and Cold) FloodStop with 3/8 Inch Compression ValvesFloodStop FS3/8CD Sink (Hot and Cold) FloodStop with 3/8 Inch Compression Valves
Water Alarm with Water Valve Stops Sink Leaks Automatically to Reduce Damage Overstock Special. Save Money! Install a Floodstop FS3/8CD water alarm with automatic water valve shut-off that closes both hot and cold water supplly lines when water leaks under a sink. Sounds an 87 db alarm. Flood Stop unit has two full port motorized water valves, lead free, with 3/8 inch compression fittings to fit hot water and cold water lines. This advanced water leak detection system helps prevent water damage and is easily installed. These brass water valves meet California, Vermont and all USA state lead free water valve standards for drinking water. Flood Stop Sink/Wash Basin Installation is Simple: Connect the water valve to cold and hot water lines under the sink. Mount the control unit. Place sensor(s) on floor. Plug power supply into an un-switched outlet. Note: electricity is used only when the sensor detects water. NOTE: DO NOT PLACE SENSOR DIRECTLY ON METAL PAN OR DAMP FLOOR. If no water ispresent and alarm sounds, place paper towel or cloth under sensor to "insulate" against floor dampness or metal of pan. When the paper or cloth gets wet, the sensor activates the shut-off and sounds the alarm. How FloodStop (FS 3/8-CD) Works: FloodStop valves connect to the angle stops and supply lines. Water leak sensor is placed at the base of the fixture (sink, laundry tubs, bathtub, etc.). Valve remains open until a water leak or water loss is detected. Water on the sensor signals the Floodstop controller which closes the valve and alarms. Valve remains closed until system is reset, and sensor is dry. FloodStop (FS 3/8-CD) Components: Motorized Ball Valves (Two Valves, 3/8 inch Compression Fitting). Control unit with battery backup (4 C batteries, not included). AC power adapter (or use 4 C Batteries as primary power source). Water leak sensor (1.25" X 7.5"). Output contact wires (2). Technical Specifications: UL Listed Class 2 Wall Adaptor, 115AC/9VDC. UPC listed,
Product Details
- Is Discontinued By Manufacturer : No
- Product Dimensions : 11.75 x 7.75 x 2 inches; 2.98 Pounds
- Item model number : FS38CD
- Date First Available : September 14, 2004
- Manufacturer : IPS Corporation
- ASIN : B0019Y4UWU
-
- Best Sellers Rank: #242,427 in Tools & Home Improvement
- #167 in Water Detectors & Alarms
FLOODSTOP for Water Heater FS3/4NPTFLOODSTOP for Water Heater FS3/4NPT
FLOODSTOP PROTECTS YOUR HOME 24 HOURS A DAY, EVERYDAY. Normally open relay output can be connected to an alarm system, automatic phone dialer or both! Open and close the valve with the press of a button. EASY INSTALLATION: Connect Floodstop Valve upstream on the cold water inlet. Mount the control panel to the wall. Place the water sensor under the heater. Plug in the valve assembly and power supply. KIT INCLUDES: 3/4" Motorized Mall Valve FLOODSTOP Control Unit Water Sensor Wall Adapter and Mounting Hardware
